Simple. Reliable. Powerful. Effective. Tested. Proven.
Each of the six rounds you place in a .357 Magnum revolver delivers some of the best performance from a handgun.
Its bare-bones design and easy-to-use mechanism make it perfect for beginners. The utility of the .357 Magnum round makes it just as pleasing for experienced shooters.
Considering the diverse ammunition loads available, it is easy to find one that works for you.
But with plenty of options on the market, that doesn’t always mean that selecting a gun is easy…but that’s why we’re here to help.
We’ve rounded up some of our favorite .357 Magnum revolver models based on features and value, so keep reading to see what we recommend!
THE QUICK LIST
-
Best Woods-Carry .357
-
Editor's Pick
-
Best High-End .357
-
Best High-Capacity .357
-
Best Medium-Frame .357
-
Best Concealed Carry .357
Table of Contents
Loading...
Why You Should Trust Us
Input into this article came from the PPT editorial team and our writers. Together we have a combined shooting experience of 30+ years, including instruction, competition, and multiple shooting disciplines.
We’ve spent countless hours researching and analyzing guns and gear to determine which is the best when it comes to features, reliability, ergonomics, and bang for your buck.
We had to make some tough calls. If you don’t see your favorite revolver, it doesn’t mean we hate it, just that we couldn’t include it this time.
What is the .357 Magnum Cartridge?
The .357 Magnum cartridge is a revolver round with a .357-inch bullet diameter. It was first introduced in 1934 and serves as the foundation of the “Magnum Era.”
Then, as now, everyone wanted more powerful ammo. This ammo has diverse use ranging from target shooting to self-defense and hunting.
The round is based on the earlier Smith & Wesson .38 Special cartridge and was first designed with a 158-grain semi-jacketed soft point (flat) bullet.
Since more of the bullet’s mass is outside the cartridge, there is more room for powder in the cartridge.
The 158-grain semi-jacketed soft point bullet permits the quicker transfer of energy, which enables the bullet to do more damage.
Aside from being much more powerful, the .357 Magnum round also needed a 1/8-inch longer case to hold more gunpowder.
This longer case makes it impossible to load a .357 Magnum round in .38 Special revolvers. The extra length prevents the revolver’s cylinder from closing and locking into place.
Check out our picks for the best .38 Special & .357 Magnum ammo for home defense, target shooting, and hunting.
Best .357 Magnum Revolvers
1. Smith & Wesson Model 60 .357 Magnum
The Model 60 is a 5-shot DA/SA stainless steel “J” frame revolver.
It has a 2.125-inch underlug barrel and exposed hammer with black synthetic grips that wear well.
This gun opts for a front blade sight and fixed rear sight. All in all, it’s an excellent concealed-carry revolver if you want a lot of firepower in a small package.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
2. Ruger Model SP-101
The SP-101 is a 5-shot DA/SA .357 Magnum available in stainless steel or blued finishes.
The 2.25-inch and 3-inch models offer synthetic black grips, front ramp sight, and fixed rear sight. Ruger also offers a 4.2-inch model that sports a fiber optic front sight and adjustable rear sight.
Personally, I like the stainless steel version since it handles moisture better than blued steel.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
3. Ruger GP-100
The Ruger GP-100 is a 6 or 7-shot .357 Magnum revolver with a DA/SA medium frame revolver.
It is available in blued and stainless steel finishes and a variety of barrel lengths — with the 4.2-inch and 6-inch offerings being the most popular.
I prefer the 4-inch underlug barrel, adjustable rear sight, and ramp front sight. Additional features include black Hogue grips and an exposed hammer.
The GP-100 is heavier and larger than the SP101, but it helps to stabilize the gun and control recoil.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
What do you think of the Ruger GP-100? Rate it below!
4. Manurhin MR73 Sport
The Manurhin MR73 is a 6-shot .357 Magnum revolver that is available in barrel lengths between 4 and 8 inches with a deep blue finish.
Developed for use by French police and Special Weapons and Tactics units and fielded by the French GIGN, the accuracy and durability of this revolver are legendary.
The gun features a fully adjustable rear sight, match trigger, and is completely hand-fitted to exacting tolerances.
Although extremely expensive, the MR73 is regarded by many as the finest .357 magnum revolver ever made.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
5. Smith & Wesson Model 627 Pro Series
The S&W 627 Pro is an 8-shot .357 Magnum DA/SA.
It is a stainless steel “N” large-frame revolver with a 4-inch custom underlug barrel. This gun is also quite stylish with an 8-round fluted cylinder and choice of black synthetic or wood grips.
The Model 627 also brings a large trigger and hammer and adjustable rear sight with a gold bead front sight.
It handles .357 Magnum ammunition very well, and you will feel little recoil when firing. Another advantage…you can choose to load this gun using an 8-round moon clip.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
6. Colt King Cobra
The King Cobra is a medium-frame 6-shot revolver with a 3-inch barrel, sporting a brushed stainless steel finish.
It features a fixed rear sight, brass bead front sight, and Hogue Overmolded rubber grips.
While heavier than the standard Colt Cobra, the extra weight helps tame the recoil of the .357 Magnum cartridge and increases service life.
The grips, barrel length, weight, and good DA/SA trigger make this revolver very balanced and pleasant to shoot without being unwieldy.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
Check out our review of the King Cobra or view what others think about the Cobra over on our Pew Pew Meter Page!
Rating score
7. Colt .357 Magnum Python
Rereleased in 2020, the Colt Python made its return as a 6-shot DA/SA revolver with a high-polish stainless steel finish.
Currently, the 2020 Python is available in either 3-, 4.25-, or 6-inch configurations.
The Python also has a ventilated top rib and a full underlug to protect the ejection rod. You also get match-grade wood grips and adjustable sights.
I have found the weight of the Python ideal for stabilizing the recoil of the .357 Magnum. Not to mention, the gun is devilishly handsome.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
8. Kimber K6s
A relative newcomer in comparison to some of these models, the Kimber K6s comes in a few different models — with the main two being the standard K6s (Double-action only) and the DASA (exposed hammer).
Barrel lengths differ based on which model but most float between 2 and 4 inches.
Billed as the lightest 6-shot revolver, the K6s weighs in at around 23 ounces. If you’re looking for a high-quality concealed-carry revolver…this is it.
Prices accurate at time of writing
Prices accurate at time of writing
-
25% off all OAKLEY products - OAKLEY25
Copied! Visit Merchant
Be sure to read all about the K6s in our review!
Small, Medium, Large Frame: Which One is Right for Me?
Let’s talk a little about the various frame sizes you can expect to see when shopping…
Small Frame Revolvers
These revolvers are easy to conceal in a holster, purse, or fanny pack.
Their size also makes them easy to draw and bring to bear quickly. Small frame revolvers usually weigh between 12 ounces and 2 pounds when empty.
For small frame revolvers, I don’t recommend always shooting heavy-loaded .357 Magnum ammo.
It’s possible to wear out or break important parts of the revolver under these loads. For general target practice, shoot .38 Special ammo.
To simulate the carry .357 Magnum ammo, use .38 Special +P or low velocity .357 Magnum ammo.
Medium Framed Revolvers
These revolvers usually weigh between 20 and 40 ounces unloaded.
You can carry them concealed easily with a 4-inch barrel if you wear loose clothes, and they also conceal well in a fanny pack.
As with the small frame revolvers, I prefer DA/SA trigger action and stainless steel.
Steel is a little heavier, and better controls .357 Magnum’s recoil. You will get better accuracy in rapid-fire on the second and third shots.
For these guns, I still recommend using .38 Special ammunition for practice — lead round nose or FMJ.
Practice with light .357 Magnum ammunition to simulate heavier loads. Before you quit shooting for the day, shoot at least two cylinders of your defensive ammo.
Large Frame Revolvers
These revolvers weigh between 25 to 60 ounces empty.
While these guns are powerful, their large size and heavy weight make them harder to conceal. Printing is a challenge.
On the plus side, these guns can handle large amounts of heavily loaded .357 Magnum ammunition.
You can also shoot for extended time periods without feeling recoil discomfort.
For target practice, I still recommend using .38 Special ammo to save money. Use some practice time to shoot mid-range .357 Magnum ammo and finish with a few “hot” defensive rounds.
History of .357 Magnum Revolver
The development of the .357 Magnum cartridge was shepherded by some of the most brilliant minds of the era.
While there are plenty of .357 models and companies that produce them, a few gun makers immediately stand out...
Smith & Wesson
The Smith & Wesson company first started in Norwich, Connecticut, in 1852. But the company’s first .357 Magnum revolvers wouldn’t show up until 1934.
In 1957, Smith & Wesson began using its famous model numbering system.
The .357 Magnum revolver was then known as the Model 27, built on an “N” frame. The “N” frame is the largest frame used for the S&W .357 Magnum revolvers.
Smith & Wesson’s lighter “K” frame Model 19 was released in 1957 — developed to meet the special needs of law enforcement.
Some private citizens still use K Frames for self-defense, target shooting, and hunting, but they’re pretty obsolete.
You can also find some “L Frame” revolvers that are somewhere between the “K” and the “N” in frame size.
Finally, there’s the J Frame…probably one of the most popular styles of revolvers.
There are three revolvers types in this series — Chief’s Special, original Bodyguard, and the Centennial.
Sturm, Ruger, & Co. Inc.
This company is well known for .22 caliber pistols and rifles that shoot centerfire and rimfire ammo.
But they are also famous for shotguns and the .357 Magnum DA/SA, DA only, and SA Revolvers.
In 1972, Ruger introduced the Ruger Security-Six, Service-Six, and Speed-Six Revolvers for law enforcement, civilian self-defense, and military markets. The GP-100, Redhawk, and SP-101 would later follow.
Ruger also manufactures .357 Magnum revolvers, including the Blackhawk and the Vaquero.
The Vaquero is a retro-style revolver that was made for cowboy action shooting fans and looks like the old Colt Single Action Army Revolver of 1873.
Colt Manufacturing Company
One of Colt’s most famous revolvers is the 1873 Colt Single Action Army in the Colt .45 caliber.
It was popular with the public and used in the U.S. military from 1873 to 1892. You probably also know it as the gun that won the West.
Final Thoughts
When selecting a .357 Magnum revolver, keep in mind frame size and capacity so you can be sure to pick the one that’s perfect for you.
There are a ton of revolver models floating around the market, and most are solid. These happen to be some of our favorites.
What are your favorite models? Let us know in the comments below. To see what we recommend feeding your revolver, check out the Best .357 Magnum Ammo.
203 Leave a Reply
I have an older S&W model 10 .38 spl. that I've had for over 45 years. I really enjoy shooting that gun, it's just fun. I also own a RUGER gp100 .357 4". I really like shooting it also, even with heavy mag. loads. I'm planning on getting a 6" model for fun and a hunting side arm. I just like shooting revolvers.
What is the value of a ruger blackhawk 357 magnum. Never been shot.
Manure-in and Kimber are not good. From my experience having to repeatedly return a Kimber revolver and take it to gunsmiths is reality. Manurin is a waste of money because a standard Smith & Wesson outperforms it and it's cheaper (not to mention Ruger).
Hello, missed the S&W 586/686 (plus) or 3-5-7 version of .357 Mag Revolvers in your posts. As well as 8'' .357 versions of S&W Revolvers. Just to mention, I've won this year actual a "Revolver King" competition in Sitzerland, consisting from 1x50m and 2x25m competitions with a S&W 3-5-7 Revolver with 7'' barrel and 7 shots capacity. This Revolver shoots even better than a Korth Revolver which is one of the most precise craftet Revolvers ever. But otherwise very nice article from you guys.
Ich finde S&W Ruger und Taurus als die idealsten, 357 Magnum-Revolver. Als Besitzer eines S&W 60 38 Spezial mit 2 Zoll-Lauf, wollte ich als 357 Magnum, natürlich einen S&W. Ich liebäugelte stark mit einem M 66 oder M 686. Beide Modelle halte ich für stabile und präzise Revolver. 1985 kam der Ruger GP 100 auf dem Markt dessen Griff und solide Konstruktion, mehr überzeugte als S&W. Nun habe ich diesen Stainless-Revolver mit 4 Zoll-Lauf seit 1990 und würde ihn, nicht mehr hergeben. Mein Fazit : Qualitativ sind S&W und Ruger ebenbürtig, betreffend Abzugscharakteristik ist S&W überlegen, hingegen ist Ruger robuster.
I like my SW 686+,thank you.
You failed to mention Freedom Arms revolvers and the BFR, both of which are American made and are top of the line. I will take an FA over a Korth or the French revolver any day. Buy American!
I kind of would have expected the L-comp or Carry-comp to have made it on here?
Ofcause the best one is the 686SSR, but I may be partial.
On the MR73, it ticks like a clockwork and the DA pull is amazing, fantastic finish as well.
Going on 40+ years now, my favorite .357 is my S&W Model 19 sporting a 6" barrel and a customized cut-down combat grip. It has never had a problem with any ammo, commercial or personal production. And it gets a lot of interest at the range.
Well as a certified NRA firearms instructor, former police officer and former competition shooter with 62 years of shooting and 47 years of instruction under my belt I agree the S&W 19 is a great gun , no complaints here. However for me my favorite wheel gun is my Colt Python 6in with a trigger job and custom grip made for my huge hands. Bobby Mcghee
Mr. Mcghee, I respect your credentials and experience. I will be 78 next month and I grew up shooting revolvers from age 6. My EDC handgun is a semi-auto, 9mm Walther PDP Compact and have carried Sig, H&K, and Walther PPQ's. The two guns I have really enjoyed shooting for fun are my friend's Colt Python (older vintage) and my new Colt Python with 4.25 inch barrel. I coach other shooters at my range and do not disparage others because they have a different preference than I but I am grateful that a person with your knowledge and experience find the Colt Python breed so rewarding.
Bobby Mcghee- I agree with a Colt Python w/trigger job. I ❤️ my PYTHON! However, there is one BETTER!! Have you ever tried the Colt Grizzly .357? It's the same as the infamous PYTHON but, get this........ it's ported! Sweet shooting gun!
P.S.- If you are interested, I have one for sale.......
I have a Taurus tracker and maybe I’m lucky ,shoots as well as the smiths and Rutgers I have had plus a 7 th round.
I am a fan of .357 revolvers. My first was the Kimber D6S 3", followed by the Ruger GP 100 4.25" I have since added these: Taurus 627 and 608
All good guns I believe in this article, however it was still a disappointment.
Budget revolvers seem to have been left out of the review cycle here?
Weirauch comes to mind. There are others.
You can find them, if you look for them.
Nothing wrong with a 627 Taurus Tracker, .357, holds 7, with the 6.5" bbl, for those on a stiff budget for a home defense gun or packing for a hike in bear country. Just got one in satin stainless (8-2023) for $458 and there is absolutely nothing wrong with it.
I have the Taurus 627 and its bigger brother the Taurus 608. These are definitely good home defense or trail guns.
I would love to get a Smith and Wesson .357 magnum all-steel revolver. Except for one thing - I do not want the trigger lock. I'll stick with Ruger.
Lots of used Smiths out there. Pretty easy to find a good one (Model 686, Model 28, et al) for less than a new Ruger.
I don't care for the trigger lock either. My guns are in the safe, unlocked, and the keys to the locks are in the gun cases, comfortably in the closet. I have the 686, Model 27 and Model 19 among other brands.
SP-101 DA for me. Very easy to carry and 5 round speed loaders make it a snap to reload quickly if needed.
My favorite is my S&W Model 19. Hefty enough to manage the recoil but light enough to carry in a chest rig all day.
The Model 19 is a nice revolver. I picked mine up a couple of months ago. I took it to the range once or twice. It may be going back again soon.
Sounds like a S&W advertisement. I have a Taurus 66 in stainless and it has served me faithfully on my side while hunting with Underwood 180-grain hard case bullets that do well to keep me outside a bear's belly. More are out there than high-priced safe queens to get the job done.
My very first pistol I bought, was a S&W Model 66 4" Combat Magnum in 1978. It was an excellent gun. I sold it to a relative in the 90s, and have kicked myself for that bit of stupidity. Currently, I' e a Interarms Virginia Dragoon SAA in .357, but I'd like to get another DA/SA. Being retired and on a budget, it's going to be a while in this Biden Economy.
Did you forget basic physics here? Short barreled .357's are like a castrated bull...fun to look at, but otherwise worthless. The forte of the .357 is blinding speed and you only get that from a four inch or preferably longer barrel. Manurhin sounds like manure. Four grand for a frog wheelgun? The Colt Python is the heavyweight champ (except for the 3" barrel model), total class all around.
This is complete unmitigated BULLSH*T. #1 The Python isn't even on the lsist #2 the list includes the budget Coplt King Cobra but not the Python? 33 rated according to the title by "Stopping Power?" Comparing the same caliber guns for "stopping power" is absolutely brain dead.
Reviews I've read on the King Cobra sounds like Colt's got some QC issues on that line.
When the Honest Outlaw says they're crap, they are crap.
I'm getting Taurus model 66 4". I've heard the old knocks on Taurus guns but I believe that things are a changing. This particular model also has a 7 round wheelhouse. Did I use wheelhouse correctly?
That's all from me.
Gotta love 357 in a good frame! I have a Security Six that I like and a K6s 3" DASA that I love. The Ruger is HD, the Kimber camping and trail. The Kimber is also cold weather CC. I just can't say enough good about the Kimber, sweet!
Used a S&W 6" 686 for years in U.S.P.S.A matches even had a compensator milled in it, the hotter the load the less the muzzle would rise. Think big Magnaports and alot of fun lol. The one thing that I did notice was about 99% of the competitors used S&W revolvers, could be how easily it was to make a very nice trigger pull or because of the way the cylinder was unlocked for faster reloads. But switched to a Model 25 45 acp to be able to use moon clips. Fast forward to today and it's a 627 8 rndr with moon clips. The only thing that I regret in hindsight is 35 years ago having a custom trigger and hammer job done on the Mod. 25 after seeing how much the value has gone up and it's not original. But man what a smooooth double action trigger.
"Since more of the bullet’s mass is outside the cartridge, there is more room for powder in the cartridge." NO!!! The case is longer for more powder! The bullets used in 38 SP and 357 Mag are externally the same dimensions. Internal construction can differ depending on the type of bullet and purpose. I manufactured ammo for over a decade commercially.
No, the case was made longer to prevent loading in a 38 special. You can load enough bullseye in a 38 special case to blow just about any 357…extra powder room is not needed or required.
I’ve owned a Ruger GP-100 since the late 80’s-first handgun I ever purchased and 100% agree with your points on the gun and versatile ammo options in general. Thanks for the informative charts on the S&W models and I’ll have to check out their 8 round revolver that I didn’t know existed!
forgot the S&W 19.
Indeed! The S&W model 19 and SS version 66 was/is one of the best law enforcement sidearms of all time. And the 2&1/2” barrel version is considered by myself and many knowledgeable handguners to be the best all round snub nose .357 ever. They are incredibly accurate with 38 loads as well…almost target level.
I own 2 S&W 19's and a S&W 66. All are great guns that have had trigger jobs and have the smoothest action of any revolver I'm aware of on the market. I also have a 29 and a 69. The 69 just can not be made to be as smooth as the earlier K and N frame guns. S&W changed the lockworks to the detriment of the gun.
I think you forgot about Taurus just like a publication like this the only put up the front most popular names. It's a shame and you're not doing anyone a service. I will no longer be reading any of your articles.
Well said James.
What about the Chiapas Rhino? If price is of no concern nor is nationality, how could the Rhino be left out?
I think the Chiappa Rhino is an interesting pistol. I would definitely like to shoot one before I buy one.
You missed the Ruger LCRx, with 3" barrel is 1/4# lighter than the K6. My service arm was a Ruger Security 6. Only recently replaced with a Security 9.
I own 4 357s, SW Model 19- SW Model 686§+1, SW Model 586 Distinguished Combat Magnum and a Model 66. My favorite is the 686! Strong and very accurate. Definitely a 357 fan.
I love my Chiappa Rhino. Very accurate with little recoil. I have 9's 45's but the revolver is my favorite to shoot.
My favorite is a Colt Trooper Mk III - 6" that I've had since 1968. I've tried the .44SW Mag. - too big to carry; and too much for me to handle. .357 mag. is a great cartridge. But a wheel gun is history. I keep mine because I know it, use it, and have speed loaders that work. But it's in my safe and I carry a semi auto... due to available firepower with a .357 Sig - in a 226 - can't beat the ballistics...
Really great article. I’ve had a S&W Mod.19 for roughly 35yrs. and has been a faithful sidearm with no complaints. Full power.357s are a handful, so shooting.38s for target practice is recommended. Another fine revolver that should have been mentioned is the Dan Wesson.357 Magnum. I have 3 Dan Wessons in.22, .357, and .44 Magnum. All are fantastic revolvers that are fun to shoot and can handle anything you put through them.
Great comment. I have been reading up on Dan Wesson revolvers lately. I would very much like to find a 15-2 pistol pack with either the 3 or 4 barrels/shrouds. Do you think there is a chance that CZ will bring these back for a limited run?
Call me "Old Fashioned"(and that would be correct, as I am an old man)but I will take my Model 66, 3" Stainless over ANY of the revolvers listed. I own 3 of them(One happens to be an "Ashland"). Yes, 2 outa the 3 are "Safe Queens". But I will put them up against any of your listed for accuracy, reliability, looks, and just plain Ol' fashioned "Cool Factor". If I gotta have a second choice, It's gunna be Ruger or "Other" SAR that can handle .357 Mag rounds. But to be honest if I'm packing a cowboy shooter, its gunna be in .45 long Colt.
All this being said, my personal CCP is a 1911 in .45 ACP. Always has been. ALWAYS will be.
You Pew-Pew guys(and gals) are doing a great job. I thoroughly enjoy your articles.
You feature the Manurhin as a high-end revolver and omit the Korth/Night Hawk in your discussion-review of .357's. You should check it out.
So for $3900 and change I could buy the worlds finest brick? Good to know.
If you shot revolvers, you have a favorite… so everyone is right! Very few I don’t care for. I’m still partial to a S&W 13-3 I have and it has a lot of miles on it…
The newer Model 627 is a beautiful handgun, but I like my Model 28 best. More barrel affords me a balance I am very accustomed to. I have handled some Redhawks in the store: Damned heavy, but certain to survive the thumping they 'impart' to the target when you run out of ammo.
I also have a PC 642 for EDC, but would recommend the LCR with fiber or tritium from sight as a better alternative, due to improved second shot recovery. Both triggers are comparable.
I already own some of the recommended revolvers and I am happy with them. However, I did recently find the Taurus Tracker 692. It comes in both Stainless and Blue PVD and has a seven round cylinder. It also comes with a second cylinder that is for 9mm giving you access to the most popular revolver and semi auto cartridges in one firearm. You might want to check it out for future reviews and lists.
I am definitely interested in a 9mm revolver. The 692 with two cylinders seems like it would be a great fit. I almost bought the Taurus 905 but I felt it was more important to get an M1 Garand at the time.
Be careful when shooting 9mm through a revolver. If the bullets aren't crimped sufficiently, they will creep forward and out of the casings as you shoot the gun. It is possible that the last bullet won't shoot due to the bullet creep.
A semi-automatic doesn't require as much crimping as a revolver, and 9mm wasdesigned for a semi-automatic.
What about the Rhino? It handles .357 mag with a 2 inch barrel like a beast.
I am a highly prejudicated in favor of larger caliber revolvers (smallest being a S&W .38 w/ 4.5" barrel) for what i call the three H's- Hunt, Hit, and Hurt- bringing down food, accuracy/proficiencey with the firearm (obviously needed for H1and H2) and puttin the hurt on evildoers up to no good (Home invasion, self and others personal safety etc) I've never had one jam, stovepipe, fail to feed etc My 357 of choice is a Ruger Blkhwk w/ 6.5 bbl I also own two 41 mags, a Ruger and a S&W ,both have 8 3/8" bbls- slight edge to the Smith for quicker reloading- 2 Colt 45 long 6" and 1 has a 4.5 AND just for shits n giggles 2 Heritage Ruffies a 6.5 and a 9 inch both with 22lr and 22 mag cylinders Not to worried bout the ol' CCL aspect I enjoy the article and the other replies to each to their own
I own a Taurus model 608 stainless 8 Shot .357 magnum 4 inch barrel. The action is super smooth. This revolver is built on a large frame similar to the Smith and Wesson model 29. The price was very affordable too. This revolver tames the recoil with even the heaviest loads. So, if you’re looking for a .357 magnum, check out this revolver. She’s a beauty and she cooks!
Did anyone mention the ugly one"Chiappa Rhino?
I love mine! It is black and I put a optic on it but I really want the nebula color because it's different. It's soft shooting even with 357 magnum rounds. With 38's it's like shooting a 22.
I have the Ruger SP-101 with the 2.25" inch barrel and the rubber grip with the finger grooves that gives you someplace to put your pinky finger. It's also worth doing a trigger job to reduce the heavy and jerky pulls for both SA and DA.
Both the Kimber K6s 2" and K6s 3" DASA.
i love my Trooper MK3..love my ugly ole glock 31/.357sig too..
I agree what about the s@w model 66 combat revolver
I have a new 66-8 2.75, stock trigger and hammer about 16-18lbs horrible I installed a Wilson Combat spring kit runs smooth like butter it's very accurate. You want J frame size 6 shots get a Kimber K6S they are excellent out of the box
You didn’t even mention the model 19? Who writes these articles
Hey AJ, you can find the author and bio linked at the bottom of every article. Thanks for reading!
Woosh
i like my Tarus 357 mag with a 4inch barrel .it might be some cheaper but it handles good and it’s accurate
Yes sir totally agree. I have the Taurus 357. And am in love with it.
I also have a Taurus and I love it.
Nope, y'all missed this one....The S&W 66-2 is the Finest .357 Revolver. You were close with the Mod. 60. But you know what they say, Close is only good in Hand grenades and Horse shoes.
Man did you guys blow it! The best .357 yet and you didn't even find anywhere on your list to put it: Dan Wesson! I bought my heavy vented rib model with 3 barrels (2.5", 4" and 8") back in early '70s (1974 I think). That was my first gun. Over the years I've bought a number of firearms that I also do love, but the Dan Wesson I would never part with. Numerous times people have offered to buy it. I have to admit though, that a 2.5" barrel is a bit silly. Doesn't make a very good concealed carry firearm.
In terms of personal defense firearms:
357 Magnum Revolvers do not have "Proven Stopping Power". Just stopping a threat does not mean the gun has "proven Stopping Power"
The great stopping power myth is that there is a "best." There is no "proven stopping power" for a particular caliber gun.
Ammo kinetic energy and shot placement determine what we call "stopping power", not the gun.
Despite the fact that some people don’t like Taurus guns, I still like my Taurus 617Ti. The titanium frame and cylinder make it comfortable to carry, I like the 7 shot capacity, and the ported barrel does help with muzzle flip. I don’t shoot it much, but for me it’s still a keeper.
You must not have fired the Taurus Tracker. I like it better than my smS&W. It is lighter than a Python and just as accurate.
I have a Taurus Tracker model 692, multi-caliber. It's my all time favorite gun. Came with two 7 chamber cylinders. First is for 357 mag & 38 sp. The 2nd cylinder is for 9-mm. The cylinder design is great. You can swap them in a matter of seconds. 6.5" barrel, stainless steel, ported to help manage recoil. The recoil is very mild. Next to no muzzle flip at all. That's with 357 mag ammo. With 9mm there's barely any detectable recoil. It's also great looking gun.
The very first gun I ever bought was a Taurus Model 66, 357 mag. That was way back in '89. Blued, 6 chambers, 6" barrel. The only problem with it was the grip was too small. Left my pinky hanging off the end. Fixed that by replacing the original with a Hogue monogrip.
Carried a Speed Six and model 19 at work, then settled on a 629. All three were great, just prefer the 44 mag for police work.
I have been a .357 fan for 50 years. I have hand loaded just about everything in .38 and
.357 you can imagine. That is why I love this combination caliber. I target shoot with my 4"
and hunt with a 8" Dan Wesson. For protection I carry a S&W model 65 with a 3" barrel. There
are many fine cartridges out there but, I'm still
sticking with the old .38/.357 combo.
I have the Ruger New model Blackhawk convertible in a 357 magnum, 6.50 in barrel. It also shoots 38 and 9mm with another cylinder. Love the way it handles.
My selection for a fine short-barreled .357 Magnum Revolver is the "S&W", Model 686 Plus with a 2.5-inch barrel, with shroud for the ejection rod. It is a stainless-steel handgun and is in the "S&W", L-Frame
Series. It is a bit heavy in weight but, with an excellent OWB holster, it can be carried concealed.
Although it has some recoil, it can be ported with two-ports on each side of the barrel. This further
mitigates recoil and muzzle lift. Using .38 Special ammunition, it handles very nicely.
You left out the best .357 revolver on the market. The Manurhin MR73
Actually, they didn't. It's #4 in the list.
I know you can't possibly include every 357 magnum you like, but for this aerticle I was surprised to see the Kimber K6s left out. I own one and compared it to the Ruger sp101 before buying the Kimber K6s. The Kimber feels beefier, it is finished better than any gun for the money. There are NO sharp edges anyhwere and it comes in 2, 3 & 4 inch barrels. I have the 3" barrel and the DASA model. This gun is FABULOUS!
You have the date incorrect on the release of the Ruger GP100. I bought one in 1982; so your "1985" bez wong.
Sorry, Ted, but you might "bez" mistaken. Check Sturm, Ruger & Co.'s website for GP100 serial number dates that indicate S/N 170-00001 (1st Issue) was first "shipped" in 1986.
BTW, I have the SS 6-shot models in 4" and 6", and find both to be superb handling, practically indestructable revolvers.
How much would a .S&W 357 mag, 586-6 shots with 8-1/4 barrel cost? I have one with excellent condition, slightly used.
How much would a .S&W 357 mag, 6 shots with 8-1/4 barrel cost?
Have a S&W Model 686 Six shot .357 magnum with a 4" barrel. Purchased this gun in 1985 and have never had a single problem with it. I still regularly take it to the range and it is very accurate and can handle a heavy load with no problem. Additionally, I have a Dan Wesson in .357 magnum with a 6" barrel purchased in 1977 and it is still in perfect shape and like the 686 it is accurate and can handle heavy loads with no problems. Guess I just love that Wesson name....
Taurus model 608 Eight shot .357 magnum 4” barrel stainless. Amazingly smooth action. Excellent price too. This is a large frame revolver. I love it because it handles all cartridges very well. Peter
How do I get a catalog with the 357 handguns
Gunbroker.com. Go to revolvers then type .357 magnum. It will list just about every 357 magnum, new and used for you to look at.
My last 3 handguns have all been revolvers. My carry gun is SP101. I did take it in to get cleaned up , but it runs very well .
I regret selling my S&W 586. Trigger was good out of the box, after about 5,000 rounds it was outstanding!
OTOH, my remaining 357, a very low mileage 4" Python in Colt Royal Blue, makes me feel better. :-)
I really enjoy my Model 27-1 Smith and Wesson with a 6-1/2 Barrel. A full power 158gr. 357 Magnum is a bit to handle but I can shoot 38 Special thru it all day long.
s/w 686 367 mag or Ruger Gp100 this is my first revolver Need advise
both good weapons.I have a 686 with a 4” barrels.I have had it close to 30 years,and still love it.Even today when I unlimber it at the range with full power a,MMO the range ,someone is bound to come up,and say”
What the hell is that!”!Usually so,meone else answer s for me.
I have two of your choices: S&W model 60 with 2.25”
And the Ruger GP100 7-shot with 4” barrel. The GP 100 is a work of art. (I also love my Henry .357 Carbine.)
Are you serious a ruger is a work of are.
I have never heard anyone in my life refer to a gp100 as anything more than sufficient. I would love to put a python in your hand for a spin at the range you wound need a roll of paper towels after making a mess in your trousers.
Python amazing gun ! But not a lot of them in brush killing much. Lucky to see light of day once a year. So work of art for a operating gun not a collector that sits and never ever will it get packed !
When I hear .357 Magnum, I immediately think, "COLT PYTHON"!!! Back in the day, it was, by far, the absolute best out-of-the-box revolver on the market...PERIOD!! The DA trigger pull was silky smooth. Nothing else came close. I personally have a 6" blued Python, circa 1978, that is new-in-box, never fired, and have no intention of firing it. And the value just keeps going up...
Hell yea python are special
I have an old model 19 and just recently started shooting again. This is a great gun. After 35 years this one is still my favorite.
Check out the new online S&W catalog. A very special Model 19.
I know a lot of people would disagree, but of all the snub noses, 357 or 38 special I have shot, the newest Taurus 605 is the one I bought and would buy again. For a small person, it fits me like a glove and is a beast that with the right ammo can do any kind of shooting you want to do. I've heard all the stories about Taurus problems, but this is a different kind of animal.
I too have been a big fan of Taurus. I have owned 2 Model 66s (6 shot), with 4 “ barrels and a 2” Model 606 (not 605). All 3 were extremely accurate and reliable. I also owed a Ruger Blackhawk w/6 1/2” barrel. With the Ruger, I once took on a guy with an AK47 at 50 yards playing kick the can. A little game where each player hits the soda can while it’s still moving. If the can stops moving, the shot doesn’t count.... I won! The Blackhawk never missed.
I know nobody likes to mention the "t" word, but honestly, Taurus has really stepped up their game, and more importantly, their quality control over the past couple years. Their prices are still reasonable, but they are starting to climb, as the name start to get respected again.
You left out the very best .357 Magnum revolver: the Smith and Wesson 686 plus. Easy to conceal carry, highly accurate and heavy enough to handle full power loads.
686+ 4 inch is the best overall revolver on the market right now
.357 Ruger Blackhawk long barrel, how does it rate among pistols
I have a couple blackhawks and they are fine guns that will last a lifetime super strong. Not much else to say. 357 and 44mag.
Great combo with a short lever rifle for the truck.
Great article.
There is one correction you might care to make in the interest of accurate history, though. According to Frank Barnes' "Cartridges of the World," the .357 case was made 1/8 inch longer in order to keep it from being chambered in .38 Special cylinders that were not strong enough to handle the much higher case pressure of the .357. Case volume was not an issue. The .38 Special case has plenty of volume. It was originally developed for black powder loads. Black powder occupies a far greater volume than smokeless.
Indeed, .38 Spl. cases were difficult to load with light loads in the early days due to *excessive* volume. "Back in the day," target loads using Bullseye powder were known to detonate in the case, instead of burning progressively. I experienced that in a S&W Model 10 when teaching a new police shooter on his very first day. When we sent the gun to S&W for examination, detonation was their determination, likely due to a light handload. (Never did get rid of that guy's flinch, but he retired as a major anyway.)
The extra powder space in the .357 comes from seating the bullet farther out in the case with a cannelure, not from the extra length, which adds little in the way of volume.
Great series! Keep 'em coming.
Manurhin MR73? Korth Combat?
Price puts them out of reach for many people. Great revolvers but most people don’t know anything about them.
Very nice overview of the .357 magnum. Certainly some classic model revolvers mentioned. I still enjoy my Ruger GP100 after a decade of use, and shooting my newest addition, the Colt Cobra (even though it isn't a magnum). Also, glad you at least mentioned Taurus even though they didn't make the list. The model 627 Tracker has been one of the nicest shooting revolvers I've fired. It really holds it's own when compared to the the big boys (Colt/S&W).
I had a GP-100 and loved it. I replaced it with the Single-six and enjoy that, but I'd rather have my GP-100 back.
Indeed. If I could only have one revolver off this list, it would be the GP100. Preferably the 3" Wiley Clapp version. Which is exactly what I own and will never let go of.
I too have a GP 100 and a S&W 686 Plus. I think the GP 100 is a better all-around gun. Looks better, feels better, and shoots better Not to mention it was over 100 bucks cheaper. Both great guns but Ruger holds the edge.
Have had a stainless 4" barrel Ruger GP 100 down here in Australia (50 yard range use, no Concealed Carry Permit possible here), for about five years, and can attest to the solid build and reliability of the gun. I believe the Ruger GP 100 would be a little too heavy for regular carry. I reload .38 Special for target shooting and the heavy frame is just right for the recoil of the .357 cartridge.
The EAA Windicator* .38/.357 magnum from European American Armoury is an excellent choice not mentioned here....especially for those on a bit of a budget. They have a snub nosed (2in) and full sized (6in) revolvers. They are in similar
price range, or lower, than Taurus, they can be found at $300 or lower even. It is not in S&W or Ruger league or prestige but for basic day to day practicality on the street or bedside I'd put it up against anything, really.
They are very sturdy guns, on the heavy side, which I like (I'd say "have a nice weight to them,") good (albeit very basic, and fixed) sights.I find myself just as if not more accurate with my aptly-named Windicator than any gun of it's size, and more than any standard polymer 9mm/.40cal. For me the only guns that compete in terms of my own accuracy at self-defense range would be my 1911 and S&W revolvers. This is using the gun in single action. It's double action trigger pull is quite heavy and less, but not poorly accurate (I always shoot single action although I practice a DA double-tap although even if I had to execute one I train doing it in SA anyway. Generally I never shoot the gun in DA, as a matter personal preference and much better accuracy. It's easy to build muscle memory of draw, clear, finger on trigger, pull hammer and then trigger, repeat. All winds up one smooth, muscle-memorized motion if, God forbid, I ever had to use that skill in a defensive situation.)
I have zero complaints about the Windicator. It does not conceal particularly well but is not intended as such.
I've owned more than one; one that I got 2nd hand I had to replace the ejector rod, but this was cheap, and would not have given me any trouble in a defensive situation where I needed more than six shots ... and there are very few situations that I hope I might ever run into that require more than one (well, hopefully zero!) But it was easily done by a gunsmith (unlike S&W and Ruger revolvers, it is not easily screwed off to replace and disassembling/reassembling revolvers in general is not for the faint of.heart) cheaply. Looking closely I believe the problem was the previous owner had flipped the wheel into the gun with a flick of the hand quite a few times causing the damage (NEVER do this with your revolver despite it being a rather satisfying feeling and it being ubiquitous in the movies.)
That was the only issue I've ever had. Never had it not go BANG and cycle properly when shooting. Easily a thousand through it. It is hardy and I expect its useful life to outlive mine if cared for but as far as that goes it does need thorough cleaning after a range session especially (again) around the ejector wall, grime can build up there and cause ejection problems (this contributed also to the more lasting problem I mentioned I believe).
All in all though it is as good a choice I'd say as any on the list as far as practicality goes and at a much better price; only drawback being concealability but the Windy is similar to most of the revolvers mentioned above in that category. Closest to the Taurus. I have no complaints against the Taurus revolvers except for the polymer 357, for obvious reasons--those are two words that simply don't belong together. The S&W and Ruger names speak for themselves. I've owned and shot all. I regularly carry my Windicator when in situations where deep concealment isn't a necessity (OWB under winter clothing will be fine; it'll stick out a bit in light clothing; IWB appendix carry is possible and the most concealed position available. Carried OWB people can definitely notice you have a gun if closely observing or if your jacket opens up a little bit which is why I mention different carry gfuns for different situations. In cooler carry my Windy in what you might call "semi-open" OWB carry, under a jacket or vest. Mostly it's concealed but not totally. People may well see I have a gun. But I live in a state with unrestricted open and concealed carry, so YMMV.)
All in all, apart from the inherently higher quality that you get with S&W and Ruger, the Windy is pretty much equal to any gun on this list when it comes down to all practical purposes and I'm quite fond of it. As I said before I find it very, very accurate despite having fixed and rather primitive sights.
*to be pedantic, Americans people often pronounce "Windicator" as intuitively spelled for us "WIN"-dicator; but being a German gun, it's pronounced "VIN-dicator", same as the English word "vindicate." In similar enough meaning it definitely is a WIN though.)
it looks just like a Colt .357 Magnum Python and it comes in 2inch and 4inch, not 6 as you stated. it is indeed a great lil gun for the money
.357 is the only way to go. It shoots both .38. & .357 . I believe that the 2.25 barrel. I don’t prefer it for carry, for that I chose my sig p380 hd. Perfect for concealed carry. My kimber1911,45 ultra carry 2, &metro arms 1911 .45 hard chrome are too big for carrying ideally and my beretta 9mm is to. I keep those at home. I don’t have anything else but I think that’s enough to get it done. I have sold my others over the years,, many of which I would love to have kept so I’ve decided to get ones I want and I don’t want to sell. I certainly didn’t go wrong with this group of firearms. Stay safe and be good with your aim..
The problem with reviews of the BEST .357 Magnum revolvers is that the reviewers tend to be in the pockets of the advertisers. No one can argue that the Colt Python, an out-of-production .357 revolver, has to be on any list of "best" .357s, but if you open the list to guns that no longer are in production, you have to abide by that decision. Then you are obligated to consider all the magnum revolvers in and out of production. And if you do that, you should consider all the giants upon whose shoulders today's manufacturers stand.
One also must consider whether today's .357 Magnum revolvers are as good as or worse than the giants upon whose shoulders they stand. Case in point, the Ruger GP-100, an outstanding range gun. It's accurate and its heavy barrel retards the recoil, which can be sharp at times. But it can be argued that the gun the GP-100 was derived from, the Security-Six, was a vastly superior gun. One of the GP-100's claims to fame is its robustness. But many reviewers pass over the facts that the earlier Security-Six also was incredibly sturdy, plus it was lighter. And though the recoil was a bit sharper, the gun was the ideal hunting, camping, hiking and fishing gun -- none of which could be said of the heavier, klunkier GP-100. The latter is an ideal range gun, but it can't compete accuracy-wise with the S&W 686 (which is far more accurate and which isn't even on the list), and when it left the range, it wasn't very useful except as a drawer gun and a paperweight. It is far too heavy to carry hiking, camping or fishing.
And yet the Security-Six is missing from the list and the GP-100 is on it. Hmmm.
umm your going to deep with all that. any review giving is a matter of opinion of the person giving it. no gun is a must as its all in the opinion of the person who makes the liks. and a colt would not even be on my list. its all subjective and opinions we all have them just like a holes.
I quit reading when I saw two Taurus revolvers on the list, and the 686 wasn't.
Read the article again, the Taurus didn't make the list, just an honorable mention, and rightly so. Granted the 686 is a fine weapon and probably should've beat out the Ruger Redhawk at #6 but that is the choice of the author.
Marcus! Again, do we have to state so emphatically, that the list is the opinion of the author. As an example, I do happen to like the earlier 6 shot 686s, but don’t care much for the heavier 7 shooters. See how this works? My opinion.
By the way, what’s wrong with the Taurus? I’ll stack mine up to any revolver out there.
Don't quit reading, just try shooting the latest Taurus out. I have heard all the bad about the old Taurus's, but they have stepped up and are making some good stuff now. We all have our favorites and that's ok. Better than buying a gun just for there name.
You must not know about them yet. Try one!
Your article states the S&W K frame is obsolete. According to the S&W web site, "Today's K-Frame is available in .22 LR, .357 Magnum and .38 S&W Special." Not obsolete - maybe not as popular as they were, but not obsolete.
I purchased a new Kimber K6s and a new S&W 640 Pro last month. The K6s is soooooo much nicer! In fact I ordered 2 S&W 640 Pro series revolvers but did not take possession of one of them because it kept locking/jamming up while cycling PLUS the cylinder HAD TO BE FORCED OPEN! Not good. These were both brand new 640 revolvers and even the "good" one was not that great. Kinber revolvers from now on for me.
Kimber sucks
Hahahha, is that your "professional" opinion? Over priced at best, "suck" not hardly.
Chiappa the new 357mag revolver with the 3' is easier to carry than the 4 inch but gives you better control than the 2 inch, so dont knock it till you try it. With heavy loads the low center of fire keeps you on target if you want a revolver with ease try one
Well you left out one of the sweetest 357mags, the new rino 3' 357mags
I own a Ruger Blackhawk 61/2 “ stainless,, a S&w model 19-4,, and have sold off the two snubby .357s I don’t really miss the EAA,, but wished I wouldn’t have sold my Taurus 606 to my cousin. I’d like to see reviews on the colt lightening and the Taurus thunderbolt .357 mag pump action rifles.
I have a mid eighties Dan Wesson 357 mag 6 inch barrel ventilated rib (model is 13 V). I can smack pop cans at 100 yards all day long. Probably have over a 1000 rounds through this pistol and still shoots straight and true.
100 yards with a pistol you're a bad man..
Dan Wesson 15-2 best .357 revolver.
I'd like to know where the S&W 586-L comp fits into this discussion.
I own the Ruger gp100 6inch..SW 586 4 inch..SW K-comp 19.. I do not have a 5 shot 7 shot or 8 shot yet in 357..The model 60 is on my to get list, the pro series. K comp is by far my favorite 357mag..Colt Python has become to crazy to purchase..$$$$$$
I have used a model 66 starting in 1985. I still carry it as needed, I also have a 357 lever rifle to go with it.
Sorry but the S&W 19/66 is the finest .357, period.
I have one, 6 inch barrel, don't shoot with my Dan Wesson that also has a 6 inch barrel. Yeah the Smitty is one fine well crafted pistol, BUT my Danny will out shoot it all day long!!!
This statement in the article is incorrect, "the .357 Magnum round also needed a 1/8 inch longer case to hold more gunpowder."
Case volume was NOT a factor in the development of the 357 mag, at all. There was (and is) PLENTY of volume in the 38 special case since the 38 spl was originally a black powder cartridge and the .357 was developed using denser smokeless powder.
The extra 1/8" in case is purely and simply so that one cannot chamber a .357 cartridge in a revolver chambered for 38 special. That's it. It was done intentionally to prevent accidentally loading the .357 into a 38 special gun. Pure and simple.
You are correct, Ariel
have the s&w 627 with the 2.635 inch looking at getting the 327 trr8 or the r8 in the 5inch i think it is mot sure yet and u should change the taurus to the 608 from the 66ss same size just 8 shots. the ruger redhawk also sold out thats how i found the s&w 627 all steel gun
While I would agree with most of this article, as a dedicated SA revolver person, I think you should have touched on the Ruger Blackhawk a little more. It's a wonderful revolver and quite reasonably priced, either new or used. I shoot .38 special in mine most of the time just to minimize stress on my hand and wrist, but it's still fun to load up some .357 and shred targets with it.
While I own a number of different pistols, I love my revolvers for their simplicity, reliability, and accuracy.
TF
Yes, the Blackhawk can take any hot 357 round in stride.
I would wholeheartedly agree that perhaps another article addressing specifically SA revolvers might help.
Would also suggest discussing the intended use for the gun. A lot of the discussion here deals with trying to fit a CCW profile with the 357 even though the caliber has many first tier uses.
I own 2 S&W Mod. 66ss , 2 1/2 brl. And a Ruger BH ss 6 1/2 brl.
This list makes no sence. Manurhin and Korth are the best revolvers in the world by far. Colt and Smith doesnt stand a chance.
Manurhin and Korth are also completely unobtainable for the vast majority of people. Most of their models start at $3,000+, that just isn't reasonable for most people.
In other words, sure - a Bugatti is one of the pinnacles of cars. But if you're looking for something to get you from A to B, Toyota, Honda, even BMW will still do that just as effectively and at a price point that is accessible.
Then why is the Colt Python on this list. Currently they sell for 3-5k USD.
We normally include at least one high-end option, partly for perspective and partly because they are nice to look at. Also, the Python is just too iconic to not mention.
And king cobra ; )
I agree with the Manurhin. Have one in pristine condition and shoots like a dream. Might need to get rid of it because of hand issues. If I can't shoot it......It's a gun that needs to be shot.
Is that So !
I might want to buy it. Message me?
I have a ..357 Ruger Blackhawk. Not much was mentioned about it in your article. What is your opinion of this pistol and what do you estimate its value to be in excellent to new con dition.. Less than a box of shells has been fired through it..
You forgot the Dan Wesson. I bought mine new in 1974 (I think it was in '74...) and still haven't shot any that I like as well. Beautiful to stare at and to shoot. All of my barrels are heavy vented rib. I usually use the 4" or 6". It was the first time I ever shot a gun. I was in my twenties and knew nothing. I put the 2 and 1/2 inch barrel on, loaded with .357 and with no hearing protection, pulled the trigger. That was the last thing I heard for the rest of the day.
Colt Python is the winner without a doubt. Smoothest DA and a super clean trigger break in SA.
I had heard at one point that the Python's have the most moving parts of any revolver on the market which is one reason for their feel.
What about Kimber K6S? I like mine a lot.
Hands Down the best .357 Magnum Revolver is the Colt Python. It has been for going one 30 or 40 years. It's had its up's and downs but i have a 1970's Blued 5" Colt Python and its in perfect condition and still shoots dead accurate after all this time i wouldn't dream of ever getting rid of it.
Jealous!
I have a python also bought 30 years ago at about 650.00 ( also bought a security six for about 1/3 of that if I remember right). Nowadays if you are just looking for a gun to go shooting with to have fun it would be way to expensive . Of course this is just my opinion.
What about the S&W 686? The best current production available, especially the 5 inch 686 performance 7 shot revolver.
no just the 627 almost the same gun so he used that one, and i agree with that choice. i wondered why he did put the 327 performance center on here 627 comes in and the performance center also. yup both these come in 4inch 5 and 6 the 627 is better than the 686
I disagree... 8 shot sounds nice, but heavy and clunky... so in practicality the 686+(7 shot) is much easier to carry... not to mention the difference in price, the 627 just doesn’t have enough to justify the cost difference over the 686+..... most forum readers tend to agree.
I LIKE THE S&W 686 AND SURPRISED YOU DID NOT MENTION IT.DO YOU SEE A PROBLEM WITH IT.
no just the 627 almost the same gun so he used that one, and i agree with that choice. i wondered why he did put the 327 performance center on here 627 comes in performance center also.
No problems with the 686! You have to spend a ton more money to get a slightly better revolver!
No mention of the CZ /Dan Wesson revolvers? Flexibility and dead on accuracy in one package.
Hey all. I own S&w revolver, model 586-3 and i Shoot on competitions. 25m range. Can you recommend me the best bullets to choose for precision. I am experienced shooter. Thank you
Lots of great guns and points here but as with any beat of list, you like what you like. I’ve owned the Taurus and loved it but wasn’t old enough to really appreciate it but it was beautiful and worked great. Currently own a GP100 6” Stainless with a 9lb hammer and 10lb return spring and I polished all internals and it’s as smooth as mayonnaise it’s a 6lb 7oz double action pull. Also own a 4.2” SP101 polished in and out and springs. Stock springs on the 101 are pretty stout for the ergonomics but a wonderful piece and I also own a Colt Trooper MKIII with a 4” barrel and target trigger and hammer. Beautiful gun and nice action but shooting heavy loads one handed makes my hand slide up the back. Tried a few different grips but not a lot of selection for that model, but it deserves to be on there being the first revolver with the transfer bar. SW are fantastic guns, just never loved the short hammer pull, again, not what I was used to. I couldn’t put the Rhino down fast enough. Personally, I feel they are more than a bit dangerous for beginners putting their fingers to far forward with the bottom round firing.. apologize for the length.
I kinda like my Colt Lawman MK III with 2 in bbl and MK V with 4 in bbl. They’re basically Troopers but less expensive with fixed sights and not quite as gussied up. Both shoot very well.
I enjoyed reading y'all's comment. I would like to get ahold of a Smith & weightWesson 357 Magnum with 8 and 3/8 inch barrel. I love the large frame guns I own 2 44 Magnum Smith & Wesson revolvers with 8 and 3/8 inch barrels and I only shoot iron sights. The older gun I have probably killed 30 deer the slightly newer one probably 15 or 20. My longest shot was approximately 123 yard shooting a souped up Hornady xtp round. I loaded it myself using 180 grain bullets and Hodgkins h110 powder. But if any of y'all out there got a long barrel 357 Smith I sure would like to find one. Thank y'all! Jack
Uh, couple more you left out, Charter Arms, Chiappa, Wesson Arms, etc.
Hi, just got the 357 Magnum bug. In the past 6 months I purchased a 1972 Smith and Wesson 27-2, a 1968 Colt Trooper (Python style action), and a 1965 Colt Python. All 8 inch barrels. Love all of them. Only test fired the Python as it is in pristine condition. The Trooper was a steal as someone didn't know what they had. And I had to have a S&W, but still looking for a "Registered Magnum" model. The 27-2 is very nice. Thanks for the article.
So jealous of the Python!
Yay .357 revolvers! I was lucky enough to grow up with .357s available to shoot and since then it has always been my go to cartridge. I puchased a fired once, the sights hadnt even been corrected it was hitting low left, Taurus 66 6inch about 7 months ago and it is by far my favorite range gun. It is such a pleasure to shoot I have no problems dumping 200 rounds through 'er during a range session.
Jerry R. Parris July 15, 2017
Over the years I have owned most of the 357 Mag Revolvers you listed and since I reload I have put a lot of lead through them. All the Revolvers you listed are excellent but you left out one of the best 357 Mag. ever made, the Ruger Security Six. and (Speed Six in Stainless). The Security Six has the best reviews of all 357 Mag. Revolvers. I have reduced my 357 Mag Revolver holdings to the Ruger Security Six, Ruger SP101 and Ruger GP 100. Allmost every round through them have been full house 357 Mag. and have never had a problem with any of them. If you can find a Security Six in good condition, Buy it. They are getting harder and harder to find as most people who have one will not part with it.
Bought a security 6 (4" barrell) about a year ago. I love that gun! An officer traded it in and I was fortunate enough to see it before anyone else did. Clean and mean. Minimum wear. Haven't put as many rounds through it as I would like, but it seems like we were made for each other. Considering on getting a GP100, but I'll never intentionally part with my security 6.
I have 2 Colt king cobras and one python. I we had them for for years. I paid 350-400 dollars for the king cobras and only 300 for the python. They are amazing guns. I love them. I just still don't understand why they are suddenly worth so much money. I have heard from my local gun dealer that they can easily pull $3,000. For pythons now.
Only because they're no longer in production, and they were all "hand crafted" so-to-speak in that all the parts were put together by hand. In 2003 Colts new ceo decided they weren't going to build "obsolete" handguns for the civilian market anymore, decommissioned the machining tools that forged the python, and decided to focus all their attention on AR platforms for government contracts.
Smith and Wesson K frames are obsolete but a $2500 used python is not? If you are referring to police work they all are obsolete. It seems a little odd that the best selling revolvers in the history of the world,some of which are still being manufactured,are obsolete but 2 discontinued and very expensive used Colts are recommended. I mean absolutely no disrespect toward your decisions,heck I'd love to own a python,but as someone advising new people about the world of revolvers you might want to revisit the K frame models. Thanks,Tad
Hey Tad, great point!
And when this article was written S&W were producing their new K frames that have been reinforced through the forcing cone area. Both Models 66 and 19 are now being produced again, capable of handling hot 357 loads. If there is a S&W that has become redundant now it is the heavy L frame guns. Long live the mighty K frame.
NIce article, and nice to see that my "low budget"
Taurus 66, 6" made the list.
I was at my range one day with my teen sons, and another shooter pulled out his stainless steel revolver and both my sons wanted to shoot it, The nice guy let them try it, and they said I had to buy one. Not wanting to blow big buck on one, I found mine at Academy for 429, so I went ahead and bought it.. It's definitely my "funnest" gun, and bought purely for the "cool" factor. But having said that, it's way more accurate than I am, and it never has any issues with anything. I shoot exclusively reloads now, but 357 or 38spc both run excellent in it.
S&W Model 19 w/ 4" barrel, Pachmayr grips, and a sweet trigger job. Best .357 ever!!!
Nice, Morris!
I believe dan wesson should be on the list as well they had an innovative design of being able to swap barrels. The 15-2 is still available on the used market and at a reasonable price
Thanks for the rec, Colin! I definitely want to own a dan wesson one day.
I have three .357 revolvers:
1. S&W Model 27
2. Colt Lawman Mark III
3. S&W Model 66
I shoot .38 +P ammo for practice
Nice William!
Bought a GP100 Match Champion. Looking for a good holster - recommendations appreciated.
Hey Marty, there's almost no kydex options so you'll probably have to go with leather. I haven't dealt with those yet though!
I bought a Galco D.A.O. (DAO104) Outdoorsman Holster for my 4” Ruger Sec Six and it fits great.
Chiappa Rhino should be on this list. You can swap cylinders between .357 and 9mm, and recoil is pretty gentle thanks to the design.
Hey Jeremy, thanks for the rec...a Rhino is on my list of revolvers to try!
I think the rhino has it won hands down ,design reduces recoil ,still shoot my pythons and a bunch of distinguished combat magnums by s& w but the rhino is my favorite because of reduced recoil
My 2nd revolver was a Rhino. I sure tames the recoil, but I didn't care for the trigger. My daughter liked it and now she is downright deadly with it.
I have a 4" GP100 match champion that shoots like a dream. It has enough heft to tame most of the recoil, though I swapped out the wood grip.
I also have a 6" GP100 which is incredibly accurate on steel out to 200 yards. If I had younger eyes, I could push the distance further. Not sure if the Python can match it for distance.
I also owned a 3" SP101. Loved it. In fact, I have grown fond of 3" barrels. You get most of the oomph of 357, but can still conceal easily.
Thanks for all the experience George!